>

Submitted Papers

ID # Title Author Affiliation Country
IDS001 Quantitative Distinction between Detonation and Afterburn Energy Deposition Using Pressure-Time Histories in Enclosed Explosions Ames, Richard NSWC, Dahlgren Division US
IDS002 Numerical and Theoretical Investigations on Detonation Confinement Sandwich Tests Aslam, Tariq LANL US
IDS003 ISENTROPIC COMPRESSION STUDIES OF THE MESOSCALE RESPONSE OF ENERGETIC COMPOSITES AND CONSTITUENTS Baer, Mel SNL US
IDS004 GENERALIZED THERMODYNAMIC EQUATION OF STATE FOR REACTING ALUMINIZED EXPLOSIVES Baker, Ernest ARDEC US
IDS005 Simulation of Detonation Propagation and Failure in Granular Explosive Charges Banton, Rohan ARL US
IDS006 Coupling Grain Scale and Bulk Mechanical Response for PBXs using Numerical Simulations of Real Microstructures Bardenhagen, Scott LANL US
IDS007 Cook-off Model Development and Analysis of Energetic Materials using Sandia Instrumented Thermal Ignition (SITI) Experimental Data Barra, Amanda SNL US
IDS008 Equation of state for high explosives detonation products with explicit polar and ionic species Bastea, Sorin LLNL US
IDS009 Higher-Order DSD for Detonation Propagation: DSD for Detonation Driven by Multi-Step Chemistry Models with Disparate Rates Bdzil, John LANL US
IDS011 Mechanical Response and Shear Initiation of Double-Base Propellants Bilyk, Stephan ARL US
IDS012 Electrostatic Discharge Sensitivity of Pressed Solid High Explosives Borovina, Dan LANL US
IDS013 LASER-INDUCED DECOMPOSITION OF ENERGETIC MATERIALS AT STATIC HIGH PRESSURES: STUDY OF THE HNO3 / 2 – NITROPROPANE MIXTURE Bouyer, Viviane CEA FR
IDS014 The Initiation of Fine Particle Hexanitrostilbene Using Laser-Driven Flyer Plates Bowden, Mike AWE UK
IDS015 Approaches to the simulation of steady highly non-ideal detonations in heterogeneous explosives Braithwaite, Martin Cranfield University UK
IDS016 A THEORETICAL STUDY OF THE DEPENDENCE OF NON IDEAL DETONATION AND THE DIAMETER EFFECT ON THE DECOMPOSITION RATES IN CYLINDRICAL CHARGES OF POLYTROPIC EXPLOSIVE Braithwaite, Martin Cranfield University UK
IDS018 CAN THERMAL ANALYSIS RELIABLY PREDICT THERMAL COOKOFF BEHAVIOR? Burnham, Alan K. LLNL US
IDS019 Atmospheric Effects on Time-Resolved Emission Measurements of Detonation and Combustion Products Carney, Joel NSWC US
IDS020 Effect of Particle Size and Crystal Quality on the Critical Shock Initiation Pressures of RDX/HTPB Formulations Caulder, Stanley NSWC US
IDS021 Prediction of Confinement Effects on Detonation With an Analytical Two-dimensional Non-ideal Detonation Model Chan, Sek Orica CA CA
IDS022 Influence of Nanoparticles in Energetic Compositions Collet, C. SNPE FR
IDS023 An investigation into the mechanisms responsible for delayed detonations in projectile impact experiments Cook, Malcolm QinetiQ Ltd UK
IDS024 Parameterisation of the CHARM Reactive Flow Model Using Kinetic Parameters Derived from Cook-Off Experiments Cook, Malcolm QinetiQ Ltd UK
IDS025 Methods For Evaluating Aluminized RDX Explosives Cooper, Marcia SNL US
IDS026 Experimental validation of an analytical model for prediction of shock to detonation transition resulting from high velocity impacts Curtis, John QinetiQ Ltd UK
IDS027 The relationship between particle morphology and sensitivity for pure granular RDX Czerski, Helen Cavendish Laboratory, University of Cambridge UK
IDS028 Solid-state phase change in HMX during dropweight impact Czerski, Helen University of Cambridge UK
IDS029 Modeling the Bulk Mechanical Response of Heterogeneous Explosives Based on Microstructural Information De, Suvranu Rensselaer Polytechnic Institute US
IDS030 Development of Warheads Venting Technology for Cook-off Response Mitigation DeFisher, Stanley ARDEC US
IDS032 Detonation in Metal–Teflon Mechanoactivated Composites Dolgoborodov, Alexander ICP RAS RU
IDS033 Detonation-like Processes in Teflon/Al-based Explosive Mixtures Dolgoborodov, Alexander ICP RAS RU
IDS035 Application of Various Global Decomposition Model Forms to Energetic Material Cookoff Erikson, William SNL US
IDS036 REACTION ZONES AND CONDUCTIVE ZONES IN DENSE EXPLOSIVES Ershov, Alexander Lavrentyev Institute of Hydrodynamics SB RAS RU
IDS038 Examination of high-reaction velocity thermite propagation Foley, Timothy LANL US
IDS039 Behavior of Explosives Under Pressure in a Diamond Anvil Cell Foltz, Mary LLNL US
IDS040 Non-molecular phases in high explosive detonation Fried, Laurence LLNL US
IDS041 Effect of Scale on the Blast Wave from a Metalized Explosive Frost, David McGill University CA
IDS042 A combined discrete/finite element method applied to energetic materials at the meso-scale simulation under shock loading Fu, Hua China Academy of Engineering Physics CN
IDS043 Three-Dimensional Ignition and Growth Reactive Flow Modeling of Prism Failure Tests on PBX 9502 Garcia, Mark LLNL US
IDS044 Improved Wood-Kirkwood Detonation Chemical Kinetics Glaesemann, Kurt LLNL US
IDS045 On Detonation of Aluminized BTNEN-containing Mixtures Gogulya, Michael ICP RAS RU
IDS046 Generalized Steady-State Model of Heterogeneous Detonation with Non-Uniform Particles Heating Gonor, Alexander University of Toronto CA
IDS047 Theory and Analysis of Non-Ideal Detonation for RDX/Dilute Metal Mixtures Gonthier, Keith Louisiana State University US
IDS048 High pressure phase of RDX Goto, Naoyuki The University of Tokyo JP
IDS049 Small-Scale Shock Reactivity and Internal Blast Granholm, Richard NSWC US
IDS050 Shock-Induced Electro Conductivity of the Insensitive High Explosive. Grebenkin, Konstantin VNIITF RU
IDS051 Detonation Pressure Measurements on PETN Green, Leroy LLNL US
IDS052 Thermal Ignition of Explosives Using Pyrotechnics and Hypergolics Guirguis, Raafat NSWC US
IDS053 Phase Diagram of Epsilon CL-20 at High-Pressure and Temperature Gump, Jared NSWC US
IDS054 Shock initiation of the TATB based explosive PBX 9502 cooled to -55 degrees Celcius Gustavsen, R. L. LANL US
IDS055 Photographic Observation of Low Velocity Detonation in Nitromethane Hamashima, Hideki Kumamoto University JP
IDS056 Development of a reactive burn model: Effects of particle contact distribution Hamate, Yuichiro REEF, University of Florida US
IDS057 The CREST Reactive-Burn Model Handley, Caroline AWE UK
IDS058 Application of the Embedded Fiber Optic probe to make continuous measurements of detonation speed in high explosive detonation studies Hare, D. E. (Dave) LLNL US
IDS059 Detonation Behavior of Adjacent High Explosive Charges with Different Detoantion Velocities Held, Prof. Dr. Manfred TDW DE
IDS060 WENO5M Shock-fitted Solutions to 2-Dimensional Euler Equations with Reaction Henrick, Andrew  LANL US
IDS061 AN IGNITION LAW FOR PBX 9501 FROM THERMAL EXPLOSION TO DETONATION Henson, Bryan LANL US
IDS062 Comparison of the Detonation Failure Mechanism in Homogeneous and Heterogeneous Explosives Higgins, Andrew McGill University CA
IDS063 PBX 9502 Detonation Shock Dynamics Calibration: Repeatablity and Dependence on Material Lot Hill, Larry LANL US
IDS065 Pressure-Induced Molecular Structural change on Aromatic Nitro Compounds Hiyoshi, Reiko National Research Institute of Police Science, JAPAN JP
IDS066 Modeling HMX Ignition using an Enthalpy Formulation Hobbs, Michael SNL US
IDS067 INITIATION MECHANISMS IN SINGLE CRYSTAL EXPLOSIVES: DISLOCATIONS, ELASTIC LIMITS, AND INITIATION THRESHOLDS Hooks, Daniel LANL US
IDS068 Modeling Hemispheric Detonation Experiments in 2 and 3 Dimensions Howard, W. Michael LLNL US
IDS069 ALE3D Simulations of Gap Closure and Surface Ignition for Cookoff Modeling Howard, W. Michael LLNL US
IDS070 Characterization of Damaged Materials Hsu, Peter LLNL US
IDS071 Experimental Study on Deflagration to Detonation Transition of NEPE Solid Propellants Huang, Fenglei Beijing Institute of Technology CN
IDS072 Runaway Reaction in a Solid Explosive Containing a Single Crack Jackson, Scott LANL US
IDS073 Links between Macroscopic Behaviour and Explosive Morphology in Shock to Detonation Transitions James, Hugh AWE UK
IDS074 An Investigation of the Detonation Characteristics of Some Non-Ideal Explosive Compositions Based Upon Ammonium Nitrate. James, Hugh AWE UK
IDS075 Large-scale Molecular Dynamics studies of quasi-static and shock compression in crystalline ß-HMX Jaramillo, Eugenio LANL US
IDS076 Low Velocity Impacts on Explosive Assemblies Jones, Andrew AWE UK
IDS077 MEASUREMENT OF IGNITION THRESHOLD OF EXPLOSIVES USING A HYBRID HOPKINSON BAR-DROP WEIGHT TEST Joshi, Vasant NSWC US
IDS078 NEW TECHNIQUES IN CHARACTERIZATION OF HIGH STRAIN-RATE BEHAVIOR OF EXPLOSIVES Joshi, Vasant NSWC US
IDS080 Detonation Diffraction, Dead Zones, and the Ignition-and-Growth Model Kapila, Ashwani Rensselaer Polytechnic Institute US
IDS081 Overdriven Detonation in High Density Explosives Containing Tungsten Powder Kato, Hisaatsu 1Nippon Koki Co., Ltd. JP
IDS082 Detonation Characteristics of Packed Beds of Aluminum Saturated with Nitromethane Kato, Yukio Nippon koki Co.,Ltd. JP
IDS083 Floret Test Observations on Detonation Spreading in Insensitive Explosives Kennedy, James Hazards & Explosives Research & Education, LLC US
IDS084 On the Nature of Variations in Density and Composition within TATB-based Plastic Bonded Explosives Kinney, John H. LLNL US
IDS085 Laminar and deconsolidative deflagration of RDX-based explosives at high pressures Koerner, Jake LLNL US
IDS086 Non-Classical Steady-State Detonation Regimes in TNETB Kolesnikov, Sergei Institute of Problems of Chemical Physics RAS RU
IDS087 Observation and numerical simulation of high explosive under shock loading Kubota, Shiro National Institute of Advanced Industrial Science and Technology JP
IDS088 Numerical study on the scale effect in gap test of emulsion explosive Kubota, Shiro National Institute of Advanced Industrial Science and Technology JP
IDS089 The Hydrodynamics of the Early Stages of the Shock to Detonation Transition Lambourn, Brian AWE UK
IDS090 Stochastic Simulation : an Alternative Approach to Model Complex Chemical Reactions Lapebie, Emmanuel French MOD/DGA/DET/CEG FR
IDS091 Secondary Effects on Projectile-Impact Shock Initiation Lawrence, William ARL US
IDS092 Combined Initial Air Blast and Quasi-Static Overpressure Assessment of Pressed Aluminized Explosives Lee, Richard NSWC US
IDS093 SHOCK DESENSITIZATION EFFECT IN THE STANAG 4363 CONFINED EXPLOSIVE COMPONENT WATER GAP TEST (ECWGT) FOR COMPONENTS HAVING A DIAMETER LESS THAN 5 MM Lefrancois, Alexandre LLNL US
IDS094 Simulation of Sympathetic Reaction Tests for PBXN-109 Lu, Jing Ping Weapons Systems Division, Defence Science and Technology Organisation AU
IDS095 CHARGE LENGTH EFFECT ON DETONATION PARAMETERS OF THE TATB-BASED INSENSITIVE HIGH EXPLOSIVE Lubyatinsky, Sergey Russian Federal Nuclear Center – Institute of Technical Physics RU
IDS096 Rapid Data Analysis Methodologies for Streak Camera Images: Measurement of Detonation Velocity and DDT Distance of Lead Azide at Sub-Millimeter Diameters Madden, Sean SNL US
IDS097 Thermal Explosion Violence For Several Explosives – Measurements and Interpretation Maienschein, Jon LLNL US
IDS098 Evaluation of the Acceleration Ability of Aluminized High Explosives Makhov, Michael Semenov Institute of Chemical Physics RAS RU
IDS099 Measurement and ALE3D Simulation of Violence in a Slow Cookoff Experiment with LX-10 and AerMet 100 Steel McClelland, Matthew LLNL US
IDS100 ALE3D Simulation of Heating and Violence in a Fast Cookoff experiment with LX-10 McClelland, Matthew LLNL US
IDS101 An Experimental Investigation of Detonation Corner Turning using High Resolution Radiography Molitoris, John LLNL US
IDS103 A Model for Thermal Cookoff and Detonation of High Explosives Nichols, Albert LLNL US
IDS104 Energetic Materials at High Compression: First-Principles Density Functional Theory Studies Oleynik, Ivan University of South Florida US
IDS105 N-Guanylurea-Dinitramide (FOX-12): A New Extremely Insensitive Energetic Material for Explosives Applications Ostmark, Henric Swedish Defence Research Agency, FOI SE
IDS107 Evaluation of Aluminum Participation in the Development of Reactive Waves in Shock-Compressed HMX Pahl, Robert SNL US
IDS108 Closed-Bomb Combustion of Hot, Thermally Damaged PBX 9501 Parker, Gary LANL US
IDS109 Modeling Initiation by a Reflected Shock Partom, Yehuda Rafael IL
IDS110 Factors affecting quantitative high-explosive reaction violence measurements Perry, William Lee LANL US
IDS111 Matrix Isolation Spectroscopy Applied on RDX Reaction Products Pettersson, Anna Swedish Defence Research Agency, FOI SE
IDS112 Formation of CRZ 3D structure at SDT and at Shear Initiation of PBX: Effects of Front Irradiation and Reaction localization in HMX crystals Plaksin, Igor LEDAP - Lab. of Energetics and Detonics PT
IDS113 CONSTITUTIVE MODEL AND EQUATION OF STATE OF UNREACTED PBXN-109 Quidot, M. SNPE FR
IDS114 The stress vs. strain response of single HMX crystals Rae, Philip LANL US
IDS115 Multi-scale Computer Simulations to Study the Reaction Zone of Solid Explosives Reaugh, John LLNL US
IDS116 Detonation Interaction with Metal Particles in Explosives Ripley, Robert Martec Ltd. CA
IDS117 Evaluation of the Mechanical and Thermal Derivatives of the CJ State with an application to Nitromethane Roth, Julius Retired US
IDS118 The Dynamics of Detonation Failure in Conical PBX 9502 Charges Salyer, Terry LANL US
IDS119 Explosive-Driven Shock Waves in Argon Salyer, Terry LANL US
IDS120 Deflagration-to-Detonation Transition in LX-04 as a Function of Loading Density, Temperature, and Confinement Sandusky, Harold NSWC US
IDS121 Thermal and Mechanical damage of PBX’s, Part II Scholtes, Gert TNO NL
IDS122 Atomistic simulations of quasi-static and shock loading of HMX crystals Sewell, Tommy LANL US
IDS123 A Preliminary ab initio Detonation Products Equation of State Including Quantum Configurational Energies and Efficient Monte Carlo Sampling Shaw, M. Sam LANL US
IDS124 Homogeneous shock initiation in neat and chemically sensitized nitromethane Sheffield, Stephen A. LANL US
IDS125 Hydrodynamic Stability Properties of Condensed-Phase Detonations With Common Engineering-Scale High-Explosive Models Short, Mark University of Illinois at Urbana-Champaign US
IDS126 ABOUT DEPENDENCE OF DETONATION VELOCITY ON DENSITY FOR EMULSION EXPLOSIVES Silvestrov, Victor Lavrentyev Institute of Hydrodynamics SB RAS RU
IDS127 THE EVOLUTION OF A THERMAL EXPLOSION- SPATIAL AND TEMPERATURE PROFILES INTERNAL TO A PBX9501 THERMAL EXPLOSION Smilowitz, Laura LANL US
IDS128 Molecular dynamics modelling of shock and detonation fenomena in liquids of polyatomic molecules. Smirnov, Andrei Institute of Problem of Chemical Physics of Russian Academy of Sciences RU
IDS129 Detonation properties analysis of homogeneous explosives by molecular dynamics. Soulard, Laurent CEA FR
IDS130 The Performance of Explosive Shock-Initiation Models under Complex Shock Loading Starkenberg, John ARL US
IDS131 A multiphase model for heterogenous explosives in both the dense and dilute limits Stevens, David LLNL US
IDS132 The Initiation Mechanism of Direct Optical Initiation (DOI) Detonators Stewart, Scott University of Urbana-Champaign US
IDS133 Determination of the Lighting Radius for Application of Detonation Shock Dynamics Consistent with Ignition Transients in Condensed Explosives Stewart, Scott University of Illinois at Urbana-Champaign US
IDS134 Modeling detonation diffraction and dead zones in PBX-9502 Stewart, Scott University of Illinois at Urbana-Champaign US
IDS135 Deflagration Kinetics of Energetic Binder, PGN Stoltz, Chad NSWC US
IDS136 The Modeling of the Shock Reactivity and Detonation Property Trends of Explosives with Different Particle Size Distributions Sutherland, Gerrit NSWC US
IDS138 Microenergetic Research Involving a Coupled Experimental and Computational Approach to Evaluate Microstructural Effects on Detonation and Combustion at Sub-Millimeter Geometries Tappan, Alexander S. SNL US
IDS139 Shock Initiation of the PETN-based Explosive LX-16 Tarver, Craig LLNL US
IDS142 Reactive gas phase compression due to shock-induced cavity collapse in energetic materials Tran, Linhbao ARL US
IDS143 Shock-Induced Reaction in Nitromethane-Impregnated Geometrically-Regular Sample Configurations Trott, Wayne SNL US
IDS144 REACTION ZONE STRUCTURE FOR PRESSED HE AND MIXTURES OF HIGH EXPLOSIVES WITH ADDITIONS Utkin, Alexander Institute of Problems of Chemical Physics RAS RU
IDS145 LOW AMPLITUDE SINGLE AND MULTIPLE SHOCK INITIATION EXPERIMENTS AND MODELING OF LX-04 Vandersall, Kevin LLNL US
IDS146 THRESHOLD STUDIES ON TNT, COMPOSITION B, C-4, and ANFO EXPLOSIVES USING THE STEVEN IMPACT TEST Vandersall, Kevin LLNL US
IDS147 SHOCK INITIATION EXPERIMENTS AND MODELING OF COMPOSITION B, C-4, and ANFO Vandersall, Kevin LLNL US
IDS148 A NEW ACCURATE EQUATION OF STATE FOR FLUID DETONATION PRODUCTS BASED ON AN IMPROVED VERSION OF THE KLRR PERTURBATION THEORY Victorov, Sergey Moscow Engineering Physics Institute (State University) RU
IDS149 AN APPROACH FOR GENERATING A COMPUTATIONALLY EFFICIENT EQUATION OF STATE FOR CONDENSED EXPLOSIVES WHOSE DETONATION PRODUCTS UNDERGO PHASE TRANSITIONS Victorov, Sergey Moscow Engineering Physics Institute (State University) RU
IDS150 Kinetic Modeling of Slow Energy Release in Non-Ideal Carbon Rich Explosives Vitello, Peter LLNL US
IDS151 Novel High Energetic Materials: Calculation and Synthesis Attempts of Metal Pentazolates Wallin, Sara Swedish Defence Research Agency, FOI SE
IDS152 Microstructure Effects on Detonation Performance of HNS and CL-20 Welle, Eric SNL US
IDS153 Some Issues Regarding the Hydrocode Implementation of the CREST Reactive Burn Model Whitworth, Nicholas AWE UK
IDS154 THE EFFECT OF ELECTRICAL ENERGY ON DETONATION FAILURE IN WEDGES OF THE TATB-BASED EXPLOSIVE EDC35 Winter, Ron AWE UK
IDS156 On the Response of an IHE to long duration low amplitude shocks Wortley, Steve AWE UK
IDS157 The effect of binder concentration on IHE booster compositions Wortley, Steve AWE UK
IDS158 Recent Advances in Thermal Explosion Modeling of HMX-based Explosives Yoh, Jack Seoul National University KR
IDS159 New allotropes of single-bonded nitrogen by first-principle computational experiments on one-dimensional helical structures Zahariev, Federico University of Ottawa CA
IDS160 Composition B Decomposition and Ignition Model Zerkle, David LANL US
IDS161 Casing Influence on Ignition and Combustion of Aluminum Particles in Cylindrical Explosive Charges Zhang, Fan Defence Research and Development CA - Suffield CA
IDS163 Analysis of shock decomposition and sensitivity of energetic materials with ReaxFF molecular dynamics Zybin, Sergey California Institute of Technology US
IDS164 Analysis of carbon cluster formation during high-temperature decomposition of HMX and TATB with ReaxFF reactive molecular dynamics Zybin, Sergey California Institute of Technology US
IDS034 On the limit of detonation on concentration of liquid explosives` mixtures with diluents Dremin, Anatoly Institute of Problems of Chemical Physics RAS RU
IDS102 A KINETICS-BASED MODEL FOR SIMULATING DEFORMATION AND DAMAGE IN COMPOSITE SOLID PROPELLANT DURING XDT EVENTS Nguyen, Duc Lockheed Martin Space Systems Company US
IDS162 Computer modeling of scale effects at heterogeneous HE detonation Zherebtsov, Alexey Russian Federal Nuclear Center – Institute of Technical Physics RU